Oval Fountain Mister - 30 sqm
The Oval Fountain Mister is a decorative object with an innovative design. This misting diffuser looks great and the built-in light system will make your home warm and colourful. The mist is light but doesn't overflow the frosted glass vase.
This frosted glass fountain works on the ultrasonic principle. With a frequency of 1700 KHz, it is designed not to disturb animals.
It's so easy to use, all you have to do is pour water into the receptacle, plug it in and start spraying.
Advantages of the Oval Fountain Diffuser
+ Large model with long autonomy (on average 2000 hours of use)
+ Decorative and aesthetic, various shapes available in frosted glass
+ Ideal for relaxation
+ Alternating LED lights
+ Silent model (water splashes)
+ Very easy to use
+ For use in summer and winter
How does this diffuser work ?
As soon as the fountain is plugged in, it will produce a fine mist that completely covers the basin. This mist will gently overflow as the air blows. It's fitted with LEDs in a range of powerful, changing colours to create a warm, relaxing atmosphere.
These warm lights will be even more fascinating in semi-darkness, highlighting the wisps of mist.
Thanks to the innovative splash guard, you won't find any traces of moisture on your surrounding furniture. The misting system is made of ceramic for excellent durability. Thanks to the water level sensor, your misting fountain will stop automatically if it runs out of water, preventing the ceramic disc from being damaged in the open air.
You'll be able to breathe air that's less dry and healthier because it's less full of dust.
By pouring a few drops of essential oils (3 to 4 drops) into the reservoir, you can create different atmospheres to suit your mood.
Assembly and operating instructions
1 - Position the base of the shield in the centre of the mist motor.
2 - Place the assembly in the cylinder
3 - Attach the splash shield to the foot
4 - Insert the cord into the hole at the bottom of the glass vase. Fill the hole with the small rubber stopper (you can moisten the rubber to make it easier to insert). Fill the vase with water according to the water level diagram shown to get the perfect mist! The mister won't work if there isn't enough water. Nor will the mist disperse if there is too much water.
5 - Check that the voltage indicated on the transformer corresponds to the mains voltage. Connect the mist motor cord to the transformer. Place the transformer in a dry place away from the mist. Plug the transformer into the mains and your device will start up automatically.
Penn'Ty Bio's opinion
The mist is light without overflowing the vase. It's a decorative object and can be used to diffuse essential oils, although you won't get the same performance as a nebuliser. Silent, the fountain is ideal for offices, living rooms, verandas, massage rooms, yoga sessions, beauty shops and spas, for any surface area between 30 and 40 m².
Precautions for use
1 - Be careful with the water sensor. Do not hold the misting motor by its sensor, and take care not to hit or scratch it with any solid object to avoid damaging it.
2 - Do not shake the spray motor or pull on the cord when it is running.
3 - Do not place your fingers on the ceramic disc of the atomiser when it is running, as the ultrasonic vibrations could injure you, although there is no risk of electrocution.
4 - Use the transformer in a dry, ventilated area.
5 - Be sure to protect your furniture or other surfaces from any water splashes.
The principle of ultrasound diffusers
Ultrasound is a sound with a frequency greater than 20 khz that cannot be heard by the human ear (too high-pitched). When a sinusoidal signal is applied to the piezoelectric ceramics, they deform and contract, transforming an electrical wave into a mechanical vibration. This vibration will pull water molecules (and any essential oils you add) from the surface of the water and pulverise them, creating what is known as a dry mist.
The size of these 'droplets' will depend on the frequency of the device and the characteristics of the fluid (density, viscosity, surface tension). The higher the frequency, the finer the droplets. The high frequency of this device produces a very light mist.
Water is the most important thing in a misting fountain
1 - Always use mineralised water: tap water is fine, or bottled spring water if the water is very hard. Demineralised water will not allow a current to circulate and your level detector will prevent the fountain from working.
2 - Always use perfectly clean water and change it regularly: The slightest particle of dust, hair, etc. can affect the fountain's operation or prevent it from working.
3 - Always respect the indicated water levels: too little water will block the detector, too much water can alter the fountain's operation or prevent it from working.
Technical specifications
- Dimensions: height: 200mm diameter: 125mm
- Weight: 600 g
- Volume output: 30 to 40m².
- Power consumption: 12W
- Material: frosted glass
- Diffusion method: ultrasound
- Anti-splash protection valve
- Ultrasonic frequency: approx. 1.8MHz
- Ultrasonic pad designed for approximately 2000 hours of use
- LED lighting: alternating colours
- Automatic cut-out if water level too low
- Accessories: instructions, ultrasonic motor, splash shieldv - Polystyrene packaging box for maximum protection during transport
- Operates from an electrical socket
- Ultrasonic pad maintenance kit sold separately
If your mist fountain doesn't work or malfunctions
We are sometimes contacted about fountains that seem to be out of order (the fountain lights up briefly and then goes out). After checking, we find that the fountain is working perfectly. Before contacting us, you should :
- Unplug your fountain
- Clean the water sensor and the ceramic (especially if your water is hard or if you use essential oils).
- Change the water
If the problem persists
- Remove the water.
- Start your fountain without water (the detector prevents it from starting).
- Fill the tray with water up to the level of the detector.
- Gradually add more water until the fountain starts up. Once a few millimetres of water are above the detector, the fountain should start up.
Good to know
Dirty water and hard water alter the atomisation effect. When your appliance generates a simple jet of water with no mist effect, the water used is not clean enough, contaminated with grease, dust or other particles that interfere with the very principle of ultrasonic vibration spraying. Make sure you change the water and clean the vase regularly. Too much essential oil will interfere with the unit's operation. 2 to 3 drops are enough.
If, after following all these points, your fountain is still not working, please contact us so that we can take charge of repairing it. Please note, however, that our after-sales service only deals with fountains that have actually broken down and not with those that have been misused. Otherwise, the cost of returning your cooler will be at your expense.
Conformity guarantee
In the event of a breakdown during the warranty period (2 years on the electrical part), you must contact us so that we can establish a diagnosis together. A start-up video may be requested so that we can determine the malfunction.
If a fault is confirmed, your diffuser must be returned to us complete. In all cases, do not attempt to dismantle or modify the units, as you will lose all rights to the 2-year parts and labour guarantee.
The guarantee does not cover breakage or defects caused by improper use or maintenance of the appliance (level of essential oils too high, appliance not cleaned regularly, etc.).
Learn more about the Elitech France brand
The story of Elitech France is above all an initiatory journey in Asia on the virtues of plants, their values, their wealth. This great interest in flora and our environment led them to take an interest in gentle and natural methods to live better and enjoy the benefits of nature.
By creating Elitech France in 2002, it is quite "naturally" that they turned to the development of different modes of diffusion respectful of plants, by innovating with comfort and well-being solutions by atmospheric dispersion, and offering professionals effective and appropriate diffusers, accessible to the general public.
Elitech France designs, manufactures and distributes essential oil diffusers by providing advice, personalized development, know-how and sustainable quality. Their range of essential oil diffusers covers a wide choice of diffusion methods: micronization, ventilation, misting, gentle heat, capillarity.
- Power supply
- Sector
- Lighting effects
- Changing colours
- Setting
- 1 speed
- Area covered
- 30 m²
- Noise level
- Below 30 db
- Colour/Material
- White
- Type of broadcast
- Misting
Specific references
16 other products in the same category:
Probe for fogger diffuser with...
Ultrasonic diffuser LISALIA -...
Audelia misting diffuser - 50 m²
Olaki Diffuser - 40 m²
Volupsia Diffuser - 60 m²
Fountain Mister Tulip - 30 sqm
OMELIA ultrasonic diffuser - 60 m²
Diffuser Seville - 40 m²
Milano lantern diffuser - 40 m²
Cleaner for ultrasonic diffuser...
Mistilia diffuser - Pocket...
ELIA ultrasonic diffuser - 50 m²
KAOLIA ultrasonic diffuser - 30 m²
Ceralia misting diffuser - 30 m²
Veralia ultrasonic diffuser -...
O'Zen Diffuser - 60 m²
Customers who bought this product also bought: