The CERALIA essential oil diffuser will seduce you with its performance and design. It works on water mist diffusion technology. All you need to do is add a few drops of essential oils to the water (15 drops maximum) to diffuse their scents and their benefits in your interior. In addition, the soft and subdued lighting thanks to the integrated LEDs and its openwork body will transform this diffuser into a real decorative object.

Simple and elegant
Using this device is very simple. Once the tank is full of water, simply press the integrated button under the diffuser to start the device. Then begins a series of play of light and light misting, for a more zen interior atmosphere. Its raw white ceramic covering gives it a clean, sober and elegant look. Finally, the colors are adaptable according to your desires (changing colors, fixed colors).

+ Diffusion by cold misting of your essential oils

+ Warm and relaxing atmosphere thanks to the integrated changing lights

+ Sleek, sleek device with a perforated ceramic body

+ Diffusion up to 30 m²

+ Automatically stops when the water level is too low

+ Light water mist that pleasantly humidifies dry air.

The Ceralia diffuser works by misting. The misting of Ceralia is caused by the vibration of a ceramic disc at very high frequency which triggers ultrasound by its movement. This is why the Ceralia diffuser is ultrasonic by misting.

- Manufacturer's warranty : 5 years
- Functions : Light control - Water level sensor and automatic shutdown when the level is low
- Diffusion area : up to 30 m²
- Diffusion time : On/off button integrated under the product
- Power : 12W
- Product dimensions : Diam 100mm x H 125mm
- Packaging dimensions : H: 200mm W: 125mm Depth: 125mm
- Power supply : 100V~240V
- Product weight : 390g
- Packaging weight : 690g
- Other : Air humidification

1 - The appliance must be placed on a horizontal and flat surface.
2 - Connect the mains adapter to the diffuser without plugging it into a mains socket.
3 - Remove the ceramic casing and the cover.
4 - Use tap water at room temperature (not demineralised water) to fill the tank of the base with a maximum of 80 ml (do not exceed the maximum level mark).
5 - Add 5 to 15 drops (maximum) of essential oils to diffuse into the water.
6 - Replace the lid, then the ceramic trim on the base.
7 - Connect the AC adapter to an AC outlet.
8 - To switch on your Ceralia, simply press on the top of the device. This gesture will activate the "foot button" located under the device.

Successive presses will offer you several operating modes :
1st press : mist diffusion + color changing light
2nd press : diffusion of mist + light fixed on the last color that appeared
3rd press : mist diffusion without light
4th press : the device switches off (no mist or light)

1 - Make sure your device is turned off.
2 - Disconnect the mains adapter from the mains socket, then disconnect the mains adapter from the Ceralia base.
3 - Remove the ceramic casing and the lid.
4 - Empty all the remaining water from the Ceralia tank.
5 - Use a cotton swab or a very clean soft cloth to clean the inside of the Ceralia; be careful not to press too hard on the ceramic disc; this element is fragile. This cleaning is recommended every 3 uses.

Precautions : The covering of the ceramic device is simply placed on the body of the diffuser (and not fixed). You must therefore be careful when moving the device. A simple fall or mishandling could damage it.

The box contains
1- The Ceralia diffuser with its ceramic casing
2- An AC adapter and a USB cable
3- A notice translated into French, English, Spanish, Italian and German.

The Ceralia consists of the following elements
A - A ceramic covering
B - A cover
C - A base with
1 - A ceramic disc
2 - Maximum water level (80 ml)
3 - An air outlet
4 - A "foot button" to operate

In the event of a breakdown during the warranty period (5 years), you must contact us so that we can establish a diagnosis together. You may be asked for a start-up video so that we can see the malfunction.

If a breakdown is confirmed, your diffuser must be returned to us complete. In any case, do not try to disassemble or modify the devices, you would then lose all rights to the parts and labor warranty.

The warranty does not cover breakage or defects related to improper use or poor maintenance of the device (level of essential oils too high, device not cleaned regularly).

Innobiz is more than 10 years of research and expertise serving the diffusion of essential oils for the biggest aromatherapy brands. In addition to their efficiency and resistance, Innobiz essential oil diffusers are born in the hands of designers sensitive to nature: they are designed with pure lines and designed with noble materials (glass, ceramic, wood, porcelain) .

Detecting the markets of the future is also the heart of their activity. An expertise that allows them to create and design unique objects.

Innobiz manages the entire chain, from design to production, from regulatory controls to delivery to points of sale. And because they are sensitive to the fact that the products are durable, Innobiz designs each of its products in this philosophy and offers spare parts to extend the life of the essential oil diffusers.