Tulip Fountain Mist Maker - Direct Nature
The Tulip fountain mister is a decorative object with an innovative design. This fountain is very aesthetic and the incorporated light system will make your interior warm and colorful. The mist is light without overflowing too much from the frosted glass vase.
This noisy fountain in broken glass works on the principle of ultrasound. With a frequency at 1700 Khz, it is studied not to disturb animals.
Very simple to use, just pour water into the receptacle and plug in.
Advantages of the Tulip misting fountain
+ Cleaning air while diffusing essential oils
+ Colour change
+ Excellent life
How does this diffuser work?
As soon as the fountain is plugged in, it will produce a fine mist that completely covers the vessel. This mist will gently overflow through the breaths of air. It is equipped with diodes with various changing and powerful colors that allow to create a warm and relaxing atmosphere.
These warm lights will be even more fascinating in a semi-black, highlighting the volutes of mist.
Thanks to the innovative splash protection valve, you will not find traces of moisture on your surrounding furniture. The nobility system is made of ceramic to have an excellent life. Thanks to the water level sensor, your noisy fountain will stop by itself in the event of a lack of water, thus avoiding the ceramic disc from absorbing into the open air.
So you can breathe a less dry and healthier air because less loaded in dust.
By pouring a few drops of essential oils (3-4 drops) into the tank, you can create different atmospheres according to your moods of the moment.
- Power: 12w
- Material: Very shock-resistant depolice glass
- Size : height : 200mm diameter : 125mm
- Ultrasonic frequency: 1.7 Mhz
- Ceramic disc for about 2000 hours of use
- Hazel intake: ✱250 ml/h - Consumption: 50 ml of water / hour
- Delivered with transfo 220v/24v, detailed notice and in a polystyrene box for total protection during transport.
Assembly and directions of employment
1 - Position the shield foot in the centre of the noisy engine
2- Place the whole in the cylinder
3 - Fix the anti-splash shield on the foot
4 - Insert the cord into the hole below the glass vase. Refund the hole with the small rubber cap (you can humect the rubber to insert it easily). Fill the water vase according to the water level schema indicated to get a perfect mist! The heater won't work if there's not enough water. Just as the mist will not disperse if there is too much water.
5 - Check that the voltage indicated on the transformer fits well with the electrical voltages in the sector. Connect the noisy motor cord to the transformer. Place the transformer in a dry place away from the mist. Connect the transformer to the sector and your device will run automatically.
Note : the anti-splash shield is adjustable to allow you to adjust the intensity of the mist.
Precautions of uses
1 - Pay attention to the water sensor sensor. Do not hold the noisy motor by its sensor, and make sure not to hit it or scratch it with any solid object to avoid damaging it.
2 - Don't shake the noisy motor and don't pull on its cord when it's on.
3 - Don't put your fingers on the heater's ceramic disc when it works, ultrasonic vibrations could hurt you, without risk for as much electrocution.
4 - Use the transformer in a dry and ventilated place.
5 - Be sure to protect your furniture or other support from any water splashes.
The principle of ultra-sound diffusers
The ultrasound is a sound but whose frequency is more than 20 khz and cannot be audible by the human ear (too acute). Under the excitement of a sinusoidal signal applied to piezo-electric ceramics, they deform themselves by contracting, thus transforming an electric wave into a mechanical vibration. This vibration will rip off the water surface of the water molecules (and the essential oils that you add to it) and spray them, thus creating what is called a dry mist.
The size of these droplets will depend on the frequency of the device and the characteristics of the fluid (density, viscosity, surface tension). The higher the frequency and the finer the droplets. The high frequency of this device allows a very light mist.
Water is the important point in a noisy fountain
1 - Always use it mineral water : the water of the faucet fits very well or the source water in bottle in the case of a very limestone water. Demineralized water does not allow the flow of a current, your level detector prevents the fountain from operating.
2 - Always use perfectly clean water, change it regularly: The least particle of dust, hair. can alter the proper functioning of the fountain or prevent it from working.
3 - Respect the water levels indicated: not enough water, the detector blocks the operation, too much water can alter the proper functioning of the fountain or prevent it from running.
In case of non-operation or malfunction of your noisy fountain
We are regularly contacted on fountains that seem to be out of date (the ignition is very brief and the device is off). After checking, the fountain works perfectly. Before you contact us, you have to:
- Unpleasing your fountain
- Clean the water detector and ceramics (and mainly if your water is limestone or if you use essential oils).
- Change the water
If the problem persists
- Take off the water.
- Put your fountain in motion without water (the detector prevents its launch).
- Fill the water tank to the sensor level.
- To gradually add water to the start of the fountain, from a few millimeters of water above the detector, the fountain has to start.
Good to know
A dirty water and limestone water alter the effect of atomization. When your device generates a simple stream of water without a mist effect, it is that the water used is not clean enough, salie by fat, dust or other particles disturbing the very principle of ultrasonic vibration spraying. Make sure to change the water and clean the vase regularly. Too full of essential oils hinders the proper operation of the appliance. two to three drops are enough.
If after performing all these points your fountain still does not work, please contact us so that we can take care of its repair, but be careful: The VAS only takes into account fountains with a real breakdown and not bad uses. Otherwise, the return costs of your fountain will be at your expense.
The fog is light without overflowing with the vase. Decorative object, possibility to diffuse essential oils, even if you will not have the same performances as a microdiffusion diffuser.
Tulip Fountain mist maker conformity guarantee
In the event of a failure during the warranty period (2 years on an electric part), you must contact us so that together a diagnosis can be made. A set-up video can be asked so that we can see the malfunction.
If a breakdown is confirmed, your broadcaster will have to be full. In any case, don’t try to disassemble or modify the appliances, you would then lose all right to the 2-year warranty parts and hand of work.
The warranty does not support the break, or defects related to misuse or improper maintenance of the device (level of essential oils too high, uncleaned device regularly, ...).
- Works on
- Light effects
- Changing colors
- Speed adjustment
- Fixed 1 speed
- Surface covered
- 30 m2
- Emission of noise
- Less than 30 db
- Automatic shutdown
Click on a thumbnail to load the video
You might also like
15 other products in the same category:
Customers who bought this product also bought: