The fashion is at solid cosmetics for a while. and so much better! they replace the liquid products of our bathrooms with as much efficiency but with other significant environmental benefits. With them, we drastically limit our waste, save money and facilitate their transport.

Except that you may have experienced it, accumulate several solid cosmetics (shampoo, shower gel, shaving, ...) start to pose a daily storage and use problem. If the soap is put in a traditional soap holder, it gets wet. If you want to put it in a soap holder that is attached using a magnet, it is necessary to drill a hole or stick it if the soap holder has no suction cup.

This loving soap carrier has been developed to make life easier for you! it allows you to attach your solid cosmetics directly to your sink, shower, bathtub ... keeping it out of the water. the fixing is done usinga discreet suction cup without drilling or gluing, on all smooth surfaces. Soap is fixed on a magnet and can do so dry completely and on all these faces. any soapy solution can flow directly into the sink. The fixation of the soap holder in the shower or bathtub is done in the same way.

Forget the soft soap that sticks or degoulineates. the solid soap is in levitation, vertically. always at hand, it replaces easily and without dirt. Be careful, the soap holder is delivered without soap.

The + of this magnetic soap holder
+Practical, durable and adaptable by its small discreet suction cup
+ Maximise the life of your solid soaps and shampoos by keeping them dry
+Without drilling, no gluing
+Repositionable at will
+ Levitation soap: rests on no surface and any dirt or softening is avoided
+ always within reach and always clean
+practice and not bulky
+ stainless steel frames (in stainless steel therefore:)
+ perfect for solid cosmetics up to 160 grams
+ trophé argent innovation bio sur le salon natexpo 2021
+made in france

How to use this minimalist soap carrier ? 
1 - Clean first, the area where you want to place the suction cup (mur, sink, shower, bathtub, faience, etc.). this area must be smooth, dry and without asperity so that the small suction cup adheres best,

2 - Then, simply attach the suction cup to the desired area,

3 - After that, press the metal and magnetic insert of the soap holder in the middle of your soap or solid shampoo. Careful, if your soap is very dry, we recommend to wet it a little before incrustering the insert, then leave it quietly dry a few hours before using it for the first time. because yes, if the soap is too dry, it may break when you put the loving insert into the soap. Moreover, if the soap is wet, it will be easier to insert the capsule,

4 - There you go! You only have to love your soap with the suction cup. The installation of your minimalist soap carrier is over !

Is this soap holder made in france ?
Yes! This loving soap holder is assembled and made in france, so it is beautiful and French !

Indeed, aligned with their eco-responsible principles, the brand has made the choice to make the suction cups as well as metal inserts in a local way, even ultra-local because these pieces of the minimalist soap holder are designed in the Maine-et-Loire, close to their angelic offices. Specifically, at the ISA, a suitable company located in Saint-Barthélémy-d’Anjou. only the magnet of the soap carrier is not French, it is Chinese since they are the only magnet producers of this type. In any event, their commitment to local production allows both to reduce the use of transport and therefore the emissions of bad co2 for the environment, but also to make the local economy work.

Can I reposition the cup of the soap door where I feel right ?
Yes, absolutely and it is precisely one of the reasons that made us crack for this minimalist soap carrier! practical and repositionable, you will no longer have to hole your walls where to spread glue. So you can choose to place your soap one day and decide to move it another day, just and infinite! our loving soap holder will perfectly fulfill its role by maintaining your solid soaps and shampoos dry, you can then use them for longer!

Is this soap carrier considered zero-waste ?
No, unfortunately. Despite our efforts to offer you the most eco-friendly products possible, we cannot say that this soap carrier is zero-waste. it is not always easy to use only natural materials, such as bamboo or wood, in the design of the products of our shop. Since the suction cup is made of plastic, it cannot, therefore, be zero-waste.

Anyway, we did our best to offer you a loving local soap carrier. the objective? to minimize co2 emissions caused by transport. Why? because these emissions are harmful to our planet and it is not in accordance with our eco-responsible principles.

Next to that, our loving soap holder will also have the advantage of reducing your consumption by keeping your solid soaps dry, so you can keep them for longer.

Its characteristics
Weight: 12 grams
Dimensions: 3 x 3 x 2 cm
Materials:Magnet made of china (no magnet manufacturer in france or europe), stainless steel insert made of france, plastic cup
Source: France
Delivered without soap

Trophy silver "bio innovation"
Natexpo is the international trade fair for organic products. It is the event that draws the bio of tomorrow, organized by and for bio professionals. the company I love my teeth won in 2021 the silver trophy of the category products and services for the house and the person with its loving soap holder. a beautiful reward of a whole industry of which she is obviously very proud.

I like my teeth, an adventure part of a simple idea...
In 2017, three friends working in the same company started to create an activity with the main idea of revisiting a everyday object: the toothbrush. alexis, dolphin and thomas wanted a natural product in accordance with current societal issues, if possible without plastic.

He then follows many steps in the life of I love my teeth! After having passed their bet by launching the bamboo toothbrush sold by subscription on the internet, I like my teeth! decides to develop and now offers a wide range of products including hairbrushes and beard brushes and various malignant accessories for everyday life.

Today, I love my teeth! designs and markets a full range of everyday products and accessories for zero-waste bathrooms. It offers alternatives to everyday products to consume less, better and more local... in your bathrooms.